![](/images/new-backgrounds/1147145/147145299x1.webp)
Troubleshooting | Error List |
|
|
Error List
A typical ATCA system is highly sophisticated. This chapter can be taken as an error list for detecting erroneous system configurations and strange behaviors. It cannot replace a serious and sophisticated presales and postsales support during application development.
If it is not possible to fix a problem with the help of this chapter, contact your local sales representative or Field Application Engineer (FAE) for further support.
Problem | Possible Reason | Solution |
Blade does not work | Backplane voltage is too | Check that all backplane |
| low. | voltages are within their |
|
| specific ranges. |
|
| Check that power supply is |
|
| capable to drive the |
|
| respective loads. |
Blade does not start | No valid BIOS was found. | Make sure a valid BIOS |
|
| PROM is installed |
150 | PENT/ATCA−717 |