Order No.a

Rev.

Date

Description

 

 

 

 

226132

AA

May 2005

Changed logo, copyright, ... from

 

 

 

Force Computers to

Motorola;generalized safety notes regarding maximum combined power dissipation of installed PMC modules; in power requirements: added exceptions applicable to US and Canada; in standard compliances: removed IEC60068 (officially withdrawn) and UL94V−0/1 (already covered by 60950 and NEBS) standard; added section "Restoring BIOS Default Settings"; added "Restore BIOS Default Settings" procedure; added info on redundant FPGA feature (section Devices Features and Datapaths−>FPGA); in switch setting description and Flashes section: renamed boot flash to default flash and user flash to backup flash; extended description of redundant flash feature; in standard compliances section: added note on NEBS compliance and grounding; adapted figures showing the blade face plate to new Motorola face plate; added note to section "Updating BIOS"; updated list of IPMI sensors in section: Intelligent Platform Management Controller

in section "Switch Settings" extended description of "Clear CMOS RAM" and "Serial COM port swapping" switch ; extended section BIOS−>Serial Console Redirect−>Default Configuration; added section "About this Manual"

16

PENT/ATCA−717

Page 16
Image 16
Motorola ATCA-717 manual PENT/ATCA−717