Switch Settings | Installation |
|
|
Switch | Description |
SW7−3 | Routing of PMC slot 3 Pn4 connector pins 30 and 31 |
| OFF: Pin 30 and 31 are routed to zone 3 backplane connector and |
| are available as PMC I/O signals (default) |
| ON: Pin 30 and 31 hold clock reference signals generated by |
| clock synchronization building block |
SW7−4 | Routing of PMC slot 4 Pn4 connector pins 30 and 31 |
| OFF: Pin 30 and 31 are routed to zone 3 backplane connector and |
| are available as PMC I/O signals (default) |
| ON: Pin 30 and 31 hold clock reference signals generated by |
| clock synchronization building block |
PENT/ATCA−717 | 45 |
