Ordering Information | Introduction |
|
|
Ordering Information
When ordering the board variants, upgrades and accessories, use the order numbers given below.
Product Nomenclature
In the following you find the key for the product name extensions.aa
PENT/ATCA−717/xx−yyyy | aa |
xx | Main memory in GByte |
yyyy | CPU frequency in MHz |
Order Numbers
The table below is an excerpt from the blade’s ordering information. Ask your local Motorola representative for the current ordering information.aaaa
Note:aThis manual describes the blades listed below (PCA revision 1.3) and is delivered with these blades. For blades with other PCA revisions refer to the manuals that are delivered with those blades.a
Table 2: Ordering Information
Order Number | PENT/ATCA−717/ | Description |
123065 | 2G−1800 | Two GByte main memory, 1800 MHz CPU |
|
| frequency; (PCA revision 1.3)aa |
123066 | 4G−1800 | Four GByte main memory, 1800 MHz CPU |
|
| frequency; (PCA revision 1.3) |
The table below is an excerpt from the blade’s accessories ordering information. Ask your local Motorola representative for the current ordering information.aaaa
Table 3: Accessories Ordering Information
Order Number | Accessory | Description |
123036 | ACC/ARTM−717 | Rear transition module for |
|
| PENT/ATCA−717 bladesa |
|
| Provides access to four serial interfaces |
|
| deriving from PMCs as well as two USB |
|
| 2.0, two serial, two SATA and one |
|
| keyboard/mouse interface; supports |
|
| PPMC−280 modules installed on the |
|
| PENT/ATCA−717 |
120980 | ACC/ATCA−715/HDD | Parallel ATA hard disk |
PENT/ATCA−717 | 33 |
