
Installation | On−Board Hardware Accessories |
|
|
On−Board Hardware Accessories
The following hardware upgrades can be installed on the blade:
SPMC modules
SHard Disk
SCompactFlash card
SCMC module
PMC Modules
The blade provides four PMC slots supporting PCI/PCI−X based PMC modules. When operated in PCI mode, PMC modules run at 33/66Mhz, when operated in PCI−X mode they run at 66/100MHz. All four PMC slots use a signaling level of 3.3V.aaaaa
The four PMC slots are numbered from 1 to 4. Their location is shown in the following figure.a
46 | PENT/ATCA−717 |