Installation | Requirements |
|
|
10
Figure 2: Location of Critical Blade Temperature Spots (Blade Bottom Side)
Power Consumption
The blade′s power requirements depend on the installed hardware accessories. If you want to install accessories on the board, the load of the respective accessory has to be added to that of the blade.In the following table you will find typical examples of power requirements with and without accessories installed. For information on the accessories’ power requirements, refer to the documentation delivered together with the respective accessory or consult your local Motorola representative for further details.aaaa
The blade must be connected to a TNV−2 or a safety−extra−low−voltage (SELV) circuit. A TNV−2 circuit is a circuit whose normal operating voltages exceed the limits for a SELV circuit under normal operating conditions, and which is not subject to overvoltages from telecommunication networks.
Table 5: Power Requirements
Characteristic | Value |
Rated Voltage | −48VDC to −60VDC |
Exception in the US and Canada | −48VDC |
Operating Voltage | −40.5VDC to −72VDC |
Exception in the US and Canada | −40.5VDC to −60VDC |
40 | PENT/ATCA−717 |
