![](/images/new-backgrounds/1147145/14714561x1.webp)
Features | Introduction |
|
|
Features
The PENT/ATCA−717 is an AdvancedTCA compliant single blade computer offering high processing performance. Four on−board PMC sites, GBit Ethernet connection to the AdvancedTCA Base and Fabric interface as well as standard I/O interfaces make it ideal for telecommunication and datacom applications. An on−board 16−port Ethernet switch allows switching between PMC sites, Base and Fabric interface and the base board.aaa
Important features are:
SPentium M processor with up to 1.8 GHz speed
SUp to four GByte main memory DDR2 SDRAM with ECC protection
SDesigned for PICMG 3.0 and 3.1 compliant systems
S16−port Ethernet switch with host interface for configuration and management
SRedundant AdvancedTCA Base interface
SUp to eight AdvancedTCA Fabric Channel interfaces
SFour 64−bit/100MHz PCI−X compliant PMC slots
STwo USB 2.0 interfaces at face plate
SOptional on−board CompactFlash and 2.5 inch hard diska
SSupport for Windows 2000/2003 and Carrier Grade Linux Ed. 3.1
SIntelligent Platform Management Controller (IPMC) compliant to IPMI V.1.5 with redundant IPMB support
SSupport for four PMC Modules with Telecom clocking synchronization
SDifferent accessory kits, for example:
−Rear Transition Modules (RTMs)
−CMC debug module
−Hard disk accessory kit
−Cable accessory kits
PENT/ATCA−717 | 31 |