Requirements | Installation |
|
|
Characteristic | Value |
Max. current | 3.6A |
Max. power consumption of blade equipped with | 75W |
4 GByte SDRAM without accessories |
|
Max. total power consumption of all four PMC | 60W |
sites |
|
Max. total power consumption of all installed | 65W |
blade accessories (PMCs + hard disk) |
|
The blade provides two independent power inputs according to the AdvancedTCA Specification. Each input has to be equipped with an additional fuse of max. 90A located either in the shelf where the blade is installed or the power entry module (PEM).
PENT/ATCA−717 | 41 |
