A – Command Line Interface Set Config Command
Q
Table A-9. Set Config Port Parameters (Continued)
Parameter | Description |
|
|
ALFairness | Arbitration loop fairness. Enables (True) or |
| disables (False) the switch’s priority to |
| arbitrate on the loop. The default is False. |
DeviceScanEnabled | Enables (True) or disables (False) the |
| scanning of the connected device for |
| descriptor information during login. The |
| default is True. |
ForceOfflineRSCN | Enables (False) or disables (True) the |
| immediate transmission of RSCN |
| messages when communication between |
| a port and its device is interrupted. If |
| enabled, the RSCN message is queued |
| for 200 ms. The default is False. This |
| parameter is ignored if IOStreamGuard is |
| enabled. |
ARB_FF | Send ARB_FF (True) instead of IDLEs |
| (False) on the loop. The default is False. |
InteropCredit | Interoperability credit. The number of |
| |
| the default (12) is unchanged. |
ExtCredit | Extended credits. The number of port |
| buffer credits that this port can acquire |
| from donor ports. The default is 0. |
FANEnable | Fabric address notification. Enables (True) |
| or disables (False) the communication of |
| the FL_Port address, port name, and node |
| name to the |
| default is True. |
LCFEnable | Link control frame preference routing. |
| Enables (True) or disables (False) |
| preferred routing of frames with R_CTL = |
| 1100 (Class 2 responses). The default is |
| False. Enabling LCFEnable will disable |
| MFSEnable. |
MFSEnable | |
| (True) or allows (False) the interleaving of |
| frames in a sequence. The default is True. |
| Enabling MFSEnable disables LCFEnable |
| and VIEnable. |
|
|