Q
A – Command Line Interface Show Command
The following is an example of the Show Fabric command:
SANbox2 #> show fabric
Domain | WWN | Enet IP Addr | FC IP Addr | SymbolicName | |
16 | (0x10) | 10:00:00:c0:dd:00:77:81 | 10.20.68.11 | 0.0.0.0 | gui sb1 .11 |
17 | (0x11) | 10:00:00:c0:dd:00:6a:2d | 10.20.68.12 | 0.0.0.0 | sw12 |
18 | (0x12) | 10:00:00:c0:dd:00:c3:04 | 10.20.68.160 | 0.0.0.0 | sw .160 |
19 | (0x13) | 10:00:00:c0:dd:00:bc:56 | 10.20.68.108 | 0.0.0.0 | Sb2 .108 |
The following is an example of the Show NS (local domain) command:
SANbox2 #> show | ns |
|
|
|
| ||
Seq | Domain | Port | Port |
|
|
| |
No | ID |
| ID | Type | COS | PortWWN | NodeWWN |
1 | 19 | (0x13) | 1301e1 | NL | 3 | 21:00:00:20:37:73:13:69 | 20:00:00:20:37:73:13:69 |
2 | 19 | (0x13) | 1301e2 | NL | 3 | 21:00:00:20:37:73:12:9b | 20:00:00:20:37:73:12:9b |
3 | 19 | (0x13) | 1301e4 | NL | 3 | 21:00:00:20:37:73:05:26 | 20:00:00:20:37:73:05:26 |
4 | 19 | (0x13) | 130d00 | N | 3 | 21:01:00:e0:8b:27:a7:bc | 20:01:00:e0:8b:27:a7:bc |
The following is an example of the Show NS [domain_ID] command:
SANbox2 | #> show | ns 18 |
|
|
|
| |
Seq | Domain | Port | Port |
|
| ||
No | ID |
| ID | Type | COS | PortWWN | NodeWWN |
1 | 18 | (0x12) | 120700 | N | 3 | 21:00:00:e0:8b:07:a7:bc | 20:00:00:e0:8b:07:a7:bc |
The following is an example of the Show NS [port_ID] command:
SANbox2 #> show ns 1301e1
Port ID: 1301e1 |
|
| |
PortType | NL |
PortWWN | 21:00:00:20:37:73:13:69 |
SymbolicPortName |
|
NodeWWN | 20:00:00:20:37:73:13:69 |
SymbolicNodeName |
|
NodeIPAddress | 0.0.0.0 |
ClassOfService | 3 |
PortIPAddress | 0.0.0.0 |
FabricPortName | 20:01:00:c0:dd:00:bc:56 |
FC4Type | FCP |
FC4Desc | (NULL) |
