A – Command Line Interface Show Command
Q
| Table | |
|
|
|
Entry |
| Description |
|
|
|
LIPF7ALPS |
| This LIP is used to reinitialize the loop. An L_Port, identified |
|
| by AL_PS, may have noticed a performance degradation and |
|
| is trying to restore the loop. |
LIPF8ALPS |
| This LIP denotes a loop failure detected by the L_Port |
|
| identified by AL_PS. |
LIPF7F7 |
| A loop initialization primitive frame used to acquire a valid |
|
| AL_PA. |
LIPF8F7 |
| A loop initialization primitive frame used to indicate that a loop |
|
| failure has been detected at the receiver. |
Link Failures |
| Number of optical link failures detected by this port. A link |
|
| failure is a loss of synchronization or by loss of signal while |
|
| not in the offline state. A loss of signal causes the switch to |
|
| attempt to |
|
| a link failure is counted. A link reset is performed after a link |
|
| failure. |
Login |
| Number of device logins |
Logout |
| Number of device logouts |
LoopTimeouts |
| A two (2) second timeout as specified by |
LossOfSync |
| Number of synchronization losses (>100 ms) detected by this |
|
| port. A loss of synchronization is detected by receipt of an |
|
| invalid transmission word. |
PrimSeqErrors |
| Primitive sequence errors detected. |
RxLinkResets |
| Number of link reset primitives received from an attached |
|
| device. |
RxOfflineSeq |
| Number of offline sequences received. An OLS is issued for |
|
| link initialization, a Receive & Recognize Not_Operational |
|
| (NOS) state, or to enter the offline state. |
TotalErrors |
| Total number of errors detected. |
TotalLIPsRecvd |
| Number of loop initialization primitive frames received by this |
|
| port. |
TotalLIPsXmitd |
| Number of loop initialization primitive frames transmitted by |
|
| this port. |
TotalLinkResets |
| Total number of link reset primitives. |
TotalOfflineSeq |
| Total number of Offline Sequences issued by this port. |
|
|
|
