Q-Logic 8C/16 manual Changing Zone Types, Managing Aliases, Creating an Alias

Q

3 – Managing Fabrics Zoning a Fabric

3.4.7.7

Changing Zone Types

To change a zone type, do the following:

1.In the faceplate display, select the switch with the zone type to change.

2.Choose the Zoning button to open the Edit Zoning window.

3.In the Zone Sets tree, select the zone to change.

4.Open the Edit menu and select Set Zone Type to open the Set Zone Type dialog.

5.Open the Zone Type pull-down menu and select Soft, ACL, or VPF.

„Soft zoning is the least restrictive type of zoning.

„ACL zoning is hard zoning and is enforced by hardware and defines access to a given port. ACL zones need not include inter-switch links.

„VPF zoning is hard zoning that defines ports that can communicate with each other. VPF zones must include inter-switch links.

3.4.8

Managing Aliases

An alias is a collection of objects that can be zoned together. An alias is not a zone, and can not have a zone or another alias as a member.

Note: Changes that you make to the zoning database are limited to the managed switch and do not propagate to the rest of the fabric. To distribute changes to configured zone sets fabric wide, you must edit the zoning databases on the individual switches.

3.4.8.1

Creating an Alias

To create an alias, do the following:

1.Open the Zoning menu, and select Edit Zoning to open the Edit Zoning window.

2.Open the Edit menu, and select Create Alias to open the Create Alias dialog.

3.Enter a name for the alias, and choose the OK button. The alias name is displayed in the Zone Sets dialog. An alias name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -.

4.Choose the OK button to save the alias name to the zoning database.

59022-06 A 3-29