Q-Logic 8C/16 manual Fabric Tree

Q

2 – Using SANbox Manager SANbox Manager User Interface

2.10.3

Fabric Tree

The fabric tree lists the managed fabrics and their switches as shown in Figure 2-9. The window width can be adjusted by clicking and dragging the moveable window border. An entry handle located to the left of an entry in the tree indicates that the entry can be expanded. Click this handle or double-click the entry to expand or contract a fabric tree entry. A fabric entry expands to show its member switches.

Fabric

Entry

Entry Handle	Moveable
Switch	Window Border
Entries

Figure 2-9. Fabric Tree

Each fabric tree entry has a small icon next to it that uses color to indicate operational status.

„A green icon indicates normal operation.

„A yellow icon indicates that a switch is operational, but may require attention to maintain maximum performance.

„A red icon indicates a potential failure.

„A blue icon indicates that a switch is unknown, unreachable, unmanageable, or a switch with security enabled when the fabric management switch has security disabled.

The fabric tree provides access to the topology and faceplate displays for any fabric or switch.

„To open the topology display from the fabric tree, click a fabric entry.

„To open the faceplate display from the fabric tree, click a switch entry.

59022-06 A 2-17