Q
A – Command Line Interface Show Command
perf [option]
Displays performance information for all ports. Refer to the ”Show Perf Command” on page
port [port_number]
Displays operational information for the port given by [port_number]. Ports are numbered beginning with 0. If [port number] is omitted, information is displayed for all ports. Table
| Table | |
|
|
|
Entry |
| Description |
|
|
|
AIinit |
| Incremented each time the port begins AL initialization. |
AIinitError |
| Number of times the port entered initialization and the |
|
| initialization failed. |
Bad Frames |
| Number of frames that have framing errors. |
ClassXFramesIn |
| Number of class x frames received by this port. |
ClassXFramesOut |
| Number of class x frames sent by this port. |
ClassXWordsIn |
| Number of class x words received by this port. |
ClassXWordsOut |
| Number of class x words sent by this port. |
ClassXToss |
| Number of times an SOFi3 or SOFn3 frame is tossed from |
|
| TBUF. |
DecodeError |
| Number of decode errors detected |
EpConnects |
| Number of times an E_Port connected through ISL |
|
| negotiation. |
FBusy |
| Number of times the switch sent a F_BSY because Class 2 |
|
| frame could not be delivered within ED_TOV time. Number of |
|
| class 2 and class 3 fabric busy (F_BSY) frames generated by |
|
| this port in response to incoming frames. This usually |
|
| indicates a busy condition on the fabric or N_Port that is |
|
| preventing delivery of this frame. |
Flowerrors |
| Received a frame when there were no available credits. |
FReject |
| Number of frames from devices that were rejected. |
InvalidCRC |
| Invalid CRC detected. |
InvalidDestAddr |
| Invalid destination address detected. |
LIP ALPD ALPS |
| Number of F7, AL_PS LIPs, or AL_PD (vendor specific) |
|
| resets, performed. |
|
|
|
