A – Command Line Interface Show Config Command
Q
The following is an example of the Show Config Switch command:
SANbox2 #> show config switch
Switch Configuration Information | |
AdminState | Online |
BroadcastEnabled | False |
InbandEnabled | True |
DomainID | 19 (0x13) |
DomainIDLock | True |
SymbolicName | sw108 |
R_A_TOV | 10000 |
E_D_TOV | 2000 |
PrincipalPriority | 254 |
ConfigDescription | QLogic SANbox2 FC Switch |
ConfigLastSavedBy | |
ConfigLastSavedOn | day month date time year |
True | |
Legacy Address Format | False1 |
The following is an example of the Show Config Threshold command:
SANbox2 #> show config threshold
Configuration Name: default
Threshold Configuration Information
ThresholdMonitoringEnabled | False |
CRCErrorsMonitoringEnabled | True |
RisingTrigger | 25 |
FallingTrigger | 1 |
SampleWindow | 10 |
DecodeErrorsMonitoringEnabled | True |
RisingTrigger | 25 |
FallingTrigger | 0 |
SampleWindow | 10 |
ISLMonitoringEnabled | True |
RisingTrigger | 2 |
FallingTrigger | 0 |
SampleWindow | 10 |
1Appears only if