Sharp MX-M700U, MX-M700N Margin shift, Touch the MARGIN SHIFT key on the special modes screen

SPECIAL MODES

Margin shift

The margin shift function will automatically shift the text or image on the copy paper approximately 10 mm (1/2") in its initial setting.

This function is convenient when stapling or binding copies with a string.

NOTE

The initial setting for the margin width can be changed in the administrator settings to any value from 0 to 20 mm (0" to 1") (page 16 of the administrator settings guide).

One-sided copying

OriginalImage shifted to the right

Margin

Image shifted to the left

Margin

●The shift direction can be selected from right or left shift as shown in the illustration.

Two-sided copying

Original

Image shifted	Image shifted
to the right	to the left

Or

MarginMargin

5

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

1 Touch the [MARGIN SHIFT] key on the special modes screen.

The margin shift setting

SPECIAL MODES			screen will appear.
			The margin		shift	icon
	MARGIN SHIFT	ERASE
			(	) will also appear in
			the	upper	left of the
		JOB
	PAMPHLET COPY
		BUILD	screen to indicate			that

the function is turned on.

2 Select the shift direction.

Touch a shift direction

RIGHT LEFT key to select right or left. The selected key will be highlighted.

3 Set the shift amount as needed and touch the [OK] key.

					Use the	and the
			OK
					keys to	set the	shift
		CANCEL	OK		amount.	The	shift
SIDE 1			SIDE 2		amount can be set from
10	mm(0 20)		10	mm(0 1)	0 to 20 mm in 1 mm (0"
					to 1" in 1/8") increments.

4 Touch the [OK] key on the special modes screen.

You will return to the main screen of copy mode.

About the steps that follow

If an automatic document feeder is being used, see pages 4-7through 4-10.If the document glass is being used, see pages 4-11through 4- 13.

To cancel the margin shift function, touch the [CANCEL] key on the margin shift setting screen (step 3).

5-3