Sharp MX-M700U Changing the paper size in paper tray 1 - tray, Set the paper type, Loading Paper

LOADING PAPER

3 Gently push tray 1-tray 2 into the machine.

Push the tray firmly all the way into the machine.

4 Set the paper type.

If the paper size was changed from an AB size to an inch size, or from an inch size to an AB size, or if the paper type was changed, be sure to change the appropriate settings as explained in "Setting the paper type and paper size" (See page 2-14).

5 Loading paper in paper tray 1/tray 2 is now complete.

Changing the paper size in paper tray 1 - tray 2

To change the paper size of tray 1 - tray 2, follow the steps below.

This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "Loading paper in paper tray 1 - tray 2" (page 2-2).

To have the paper size of tray 1 changed to B5, or to have the paper size of tray 1 changed from B5 to another size, consult your dealer or nearest authorised service representative. (Only a service technician can change the paper size in this case.)

1 Remove the paper size guide.	2 Adjust the paper size guide to the paper
	size to be used.

2

Tray 1 Tray 2

Hook Paper guide

With the base of the tray pressed all the way down, hold down the hook at the bottom on the paper size guide and pull the paper size guide up slightly.

NOTES

●Do not place heavy objects on the tray or press down on the tray.

●Before changing the paper size of tray 1, raise the paper guide.

(A)	(B)
LT
A4
	A4
	LT

Paper sizes are inscribed at the slot (A) on the bottom of the tray and at the hole (B) at the top of the paper size guide. ("LT" indicates 8-1/2" x 11" size.)

Align the bottom of the paper size guide with the slot, and align the hole at the top with the locking tab.

NOTES

●When attaching the paper size guide, make sure that the top and bottom of the guide are aligned to the same paper size.

●If the top and bottom of the paper size guide are not aligned to the same paper size, skewed feeding and misfeeds will result.

2-3