Sharp MX-M620N 5-26, Book copy, Touch the BOOK COPY key in the special modes screen 2nd screen

You will return to the main screen of copy mode.

SPECIAL MODES

Book copy

This function is convenient when you wish to compile copies of books or other bound originals into an attractive pamphlet format. The two pages of the open book are scanned as a set, and two pages each are copied onto the front and back sides of the copy paper (four pages are copied onto one sheet of copy paper). This allows the copies to be folded down the centre and made into a pamphlet.

[Example] Book copying an 8-page pamphlet

Originals	Finished copies are
	folded in two.
	Left binding

First page First page

Right binding

●Scan the originals from the first page to the last page. The order of copying will be automatically adjusted by the machine.

●Either left binding (right to left turning) or right binding (left to right turning) can be selected.

●Four originals will be copied onto one sheet. Blank pages may be automatically produced at the end depending on the number of the originals.

●If a saddle stitch finisher is installed, book copy can be used in combination with the pamphlet function to staple and fold the copies at the centreline.

First page First page

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

1 Touch the [BOOK COPY] key in the special modes screen (2nd screen).

4 Touch the [OK] key in the special modes screen.

5 Place the originals on the document glass. (page 4-3)

Scan the original pages in

SPECIAL MODES

COVERS/INSERTS TRANSPARENCY INSERTS

BOOK COPY TAB COPY

The BOOK COPY setting screen will appear. The book copy icon ( , etc.) will also appear in the upper left corner of the screen to indicate that the function is turned on.

the following order: Opened front and back cover

Opened inside of front cover and 1st page Opened 2nd and 3rd page

Opened last page and inside of back cover

2 Select whether the book opens to the left or to the right, and touch the [OK] key in the book copy setting screen.

			You will return to the
LEFT	RIGHT
			special modes screen.
BINDING	BINDING
		CO
		SET

3 Select any desired cover settings.

6 Make sure that the desired paper size has been selected.

If the desired paper size

AUTO A3 is not selected, select the desired size.

PAPER SELECT

100%

7 Select the number of copies and any other desired copy settings, and then press the [START] key.

CANCEL OK

RIGHT

NG BINDING

COVER

SETTING

If you wish to use a different type of paper for the cover, perform steps 4 to 12 on pages 5-6to 5- 7.

If you do not wish to use a different type of paper, continue from step 4.

8 Place the next two pages and press the [START] key. Repeat until all pages have been scanned, and then touch the [READ- END] key.

When book copy is selected, two-sided copying is automatically selected.

To cancel the book copy function, touch the [CANCEL] key in the book copy setting screen (the screen of step 2).

5-26