Sharp MX-M550N, MX-M700N, MX-M550U, MX-M620N Interrupting A Copy Run, 5-46, Touch the INTERRUPT key

INTERRUPTING A COPY RUN

The copy of the original scanned in interrupt mode is output before the remainder of the interrupted copy job.

1 Touch the [INTERRUPT] key.

If interrupt copying is

INTERRUPT

possible

during a copy

run, the

[INTERRUPT]

AUTO

key will appear. (If the

ORIGINA

key does not appear,

AUTO

2

3

EXPOSUR

interrupt

copying is not

A4

possible.)

AUTO

A4

When the [INTERRUPT]

0

CANCEL

key is touched in step 1,

ORIGINAL

A4

AUTO

the [INTERRUPT] key

EXPOSURE

will be replaced by the

AUTO A4

[CANCEL] key as shown

PAPER SELECT

	in the illustration.
100%
COPY RATIO	To cancel an interrupt

copy job while the interrupt original is being scanned or while you are selecting copy settings, touch the [CANCEL] key.

NOTES

●If you touch the [INTERRUPT] key when auditing mode is enabled, the display will prompt you to enter your account number. Enter your account number with the numeric keys. The copies you make will be added to the count of the entered account number.

●If a copy is being printed when the [INTERRUPT] key is pressed, interrupt mode will begin after the copy is finished.

●If the copy run to be interrupted is using paper from the bypass tray, the paper size and type of the bypass tray cannot be changed for use by the interrupt job.

●If the document glass is used for an interrupt copy job, two-sided copying, sort copying, and staple sort copying cannot be selected. If any of these functions are necessary, use the document feeder.

2 Place the original for the interrupt copy job in the document feeder or on the document glass (page 4-3).

3 Select the exposure mode, paper size, number of copies, and any other copy settings as needed, and then press the [START] key.

4 The previous copy job automatically resumes after the interrupt job finishes.

5-46