Sharp MX-M620U, MX-M700N 5-23, Transparency film with insert sheets, Touch the TRANSPARENCY key

SPECIAL MODES

Transparency film with insert sheets

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.

Example: Inserting insert sheets between transparencies Originals (1-sided)

Originals (2-sided)
Two-sided originals are		Insert sheets
	Inserts can also be

only supported when copied on.

automatic document feeding is used.

If the transparencies are loaded in tray 3, steps 1 to 5 below are not necessary.

1 Loadtray. transparency film into the bypass

Remove any paper already in the bypass tray before loading the transparency film. (To load paper in the bypass tray, see pages 2-10and 2-11.)

●This function only operates in "one-sided to one- sided" and "two-sided to one-sided" modes.

●Multiple copies cannot be selected in this mode.

●The inserts are inserted under each transparency as shown at left.

●Select insert paper that is the same size as the transparencies.

●When feeding insert paper from an inserter, copying on the insert paper is not possible.

●Transparencies can be fed from the bypass tray or tray 3.

●If the transparencies are loaded in tray 3, be sure to set the paper size and paper type as explained on pages 2-14and 2-15.

4 Touch the [OK] key.

TYPE/SIZE SETTING	TYPE	OK
	SIZE
AUTO-INCH	81/2X11
AUTO-AB	A4,B5
SIZE INPUT	NON STANDARD SIZE
		2/2

If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, be sure to set the paper type and size as explained on steps 5 to 7 on page 2-14and steps 8 to 10 on page 2-15.

5

2 Touch the [PAPER SELECT] key in the main screen and select the bypass tray paper type in the paper setting screen (touch (X) below).

FOR COPY.		0
		AUTO
2. B5	A4	ORIGINAL
PLAIN	PLAIN	AUTO
		EXPOSURE
HEAVY PAPER	5. A4	PAPER SELECT
PLAIN	PLAIN	100%
		COPY RATIO

(X)

3 Touch the [TRANSPARENCY] key.

TYPE.

LETTER HEAD HEAVY PAPER

5 Select the bypass tray.

0

AUTO

A4ORIGINAL

N	PLAIN	AUTO
		EXPOSURE

Y5. A4

PAPER SELECT

N	PLAIN
			100%
		COPY RATIO

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

6 Touch the [TRANSPARENCY INSERTS] key in the special modes screen (2nd screen).

PRE-PUNCHED LABELS

COLOUR TRANSPARENCY

SPECIAL MODES

TRANSPARENCY

COVERS/INSERTS

INSERTS

BOOK COPY TAB COPY

The Transparency inserts setting screen will appear. The transparency inserts icon ( , etc.) will also appear in the upper left corner of the screen to indicate that the function is turned on.

5-23