Sharp MX-M550N Part Names And Functions, 1-10, Exterior, Punch module AR-PN4A*1 See page, Tray

PART NAMES AND FUNCTIONS

Exterior

(AR-F15)

1Saddle stitch finisher (AR-F16)*1 / Finisher (AR-F15)*1(See page 3-2)

2Punch module (AR-PN4A)*1(See page 3-2)

9Power switch (See page 1-17)Turns the power on and off.

If the power does not come on when the power switch is turned on, check the main power switch to see if it is turned on.

3 Inserter (AR-CF2)*1(See page 3-14)	10 Tray 5 (Large capacity tray(AR-LC6))*1
	(See page 2-7)

4Automatic document feeder (See page 4-2)

	This automatically feeds and scans multiple sheet	11	Tray 5 (Large capacity tray(AR-LC7))*1
			(See page 2-8)
	originals. Both sides of two-sided originals can be
	scanned at once.	12	Tray 1-Tray 2
5	Front cover		The trays hold paper. Approximately 800 sheets of
			standard A4 or 8-1/2" x 11" size paper (80 g/m2
	Open to replace toner cartridge.
			(20 lbs.)) can be loaded in tray 1, and
6	Operation panel		approximately 1200 sheets of standard A4 or
			8-1/2" x 11" size paper (80 g/m2 (20 lbs.)) can be

loaded in tray 2.

7Centre tray (See page 4-9)

	13	Tray 3
Finished sheets are deposited here		Tray 3 holds paper. Approximately 500 sheets of
8 Bypass tray		standard (80 g/m2 (20 lbs.)) paper can be loaded
		in this tray. Tabbed paper and transparencies can
Special papers	(including transparency film) and
		also be loaded.
copy paper can be fed from the bypass tray.
		Tray 4
	14
		Tray 4 holds paper. Approximately 500 sheets of
		standard (80 g/m2 (20 lbs.)) paper can be loaded
		in this tray.
*1 1 , 2 , 3 , 10	and 11 are peripheral devices. For information on these devices, see the explanations of the
devices in the manual.

1-10