Sharp MX-M550U, MX-M700N Removing An Original Misfeed, 2-31, Removing misfeeds from each location

REMOVING AN ORIGINAL MISFEED

Removing a misfed original from the automatic document feeder

If an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original.

NOTES

●For misfeed removal in the main unit and other peripheral devices, see page 2-23

●When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.

Check locations A and B in the diagram at left to remove the original.

2

1 Removing misfeeds from each location.

●Check location A

Open the document feeder cover and gently remove the misfed original without tearing it. Close the document feeder cover.

●Check location B

●Misfeed in the transfer unit

Open the document transfer cover, hold the paper guide open, and remove the misfed original.

2 Opencover. and close the document feeder

Opening and closing the cover clears the misfeed display. Copying cannot

be resumed until this

step is performed. However, this step is not

necessary after a

misfeed is removed from location B.

A message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals to the document feeder tray and press the [START] key.

●Misfeed in the document exit unit

Open the document transfer cover. Rotate the transfer roller in the direction of the arrow and gently remove the original without tearing it.

2-31