Sharp MX-M700U, MX-M700N Original orientation when using the staple sort or punch function

FINISHER AND SADDLE STITCH FINISHER

■Original orientation when using the staple sort or punch function

When using the staple sort or punch function, the original must be placed in the following orientations to enable stapling or punching in the desired position on the paper.

Staple sort		Punch
Document feeder	Document glass	Document feeder	Document glass

■Saddle stitch function (only saddle stitch finisher)

The saddle stitch finisher can automatically place	<Example>
two staples for centreline binding of prints or copies
and fold them along the centreline.

3

6

4

2

7

9

11

■Hole punching (only if a punch module is installed)

When the optional punch module is installed, holes can be punched in printed pages. (When using the saddle stitch finisher, pamphlet style stapling and the punch function cannot be used together.) When using the punch function, automatic rotation of the original image does not operate.

For the allowed paper sizes for punching, see the specifications on page 3-3.

When using the punch function in copy mode, place the original with the top toward the inside of the machine. If the original is not placed in this orientation, punching will not take place at the correct positions. (See "Standard original placement orientations" on page 4-4.)

<Example>
{Original 1}	{Punch positions}

{Original 2} {Punch positions}

3-5