Sharp MX-M550N 5-28, Touch the TAB COPY key in the special modes screen 2nd screen, Special Modes

SPECIAL MODES

To display the special modes screen...

See "General procedure for using special functions" on page 5-2.

1 Touch the [TAB COPY] key in the special modes screen (2nd screen).

5 Select "TAB PAPER" for the paper type setting.

The paper type setting is explained in “Setting the paper type and paper size” (page 2-14).

If you are using tray 3, see “Setting the paper size when a special size is loaded” (page 2-17).

About the steps that follow

SPECIAL MODES

COVERS/INSERTS TRANSPARENCY INSERTS

BOOK COPY TAB COPY

The TAB COPY setting screen will appear. A tab copy icon ( ) will also appear in the upper left corner of the screen to indicate that the function is turned on.

If an automatic document feeder is being used, see pages 4-7through 4-10.If the document glass is being used, see pages 4-11through 4- 13.

When performing tab copying with a right binding

2 If necessary, set the image shift width (tab) and touch the [OK] key.

						Set	the	image		shift
					OK
						width	(tab)		with	the
	CANCEL				OK		and		keys.
IMAGE SHIFT						The width can be set
		10	mm(0	20)		from 0 to 20 mm (0 to
				5/8")			in	increments of
						1 mm (1/8").

3 Touch the [OK] key in the special modes screen.

You will return to the main screen of copy mode.

4 Load tabbed paper in the bypass tray.

Place the tabbed paper so that the edges with the tabs are the trailing edge.

To use tab paper in tray 3, set the paper type setting of tray 3 to "TAB PAPER" in the tray settings of the system settings (page 2-14).

To load tabbed paper in

tray 3, see "Loading tabbed paper" on page 2-6.

NOTE

The width of the tabbed paper can be up to A4 width (210 mm) + 20 mm (or 8-1/2" x 11" width (8-1/2") + 5/8").

If you are using left-binding tabbed paper for a right binding, either stack the sheets in reverse order or scan the originals in reverse order.(See the table on the previous page.)

To cancel the tab copy function, touch the [CANCEL] key in the tab copy setting screen (the screen of step 2).

5-28