Sharp MX-M700U, MX-M700N 3-17, Misfeed removal, Misfeed in the inserter, Remove the misfed paper

INSERTER

Misfeed removal

When a misfeed occurs in the inserter, remove the misfed paper following the procedure below.

■Misfeed in the inserter

1Gently move the inserter away from the machine while pressing the button.

6 Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

2 Removeunit. the misfed paper from the main

Be careful not to tear the misfed paper during removal.

After removing the misfed paper, perform steps 1 and 3 on page 2- 24 to reset the machine.

7 If a misfeed was not found in step 6, remove the misfed paper from under the paper guide.

Be careful not to tear the misfed paper during removal.

3

3 If misfed paper is not found in step 2, open the top cover.

8 Return the paper guide lever to its original position.

4 Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

5 If a misfeed was not found in step 4, raise the paper guide lever.

9 Push the finisher to close the gap between the machine and the inserter.

After attaching the inserter on the machine, make sure that the paper misfeed message has been cleared and the normal message display appears.

3-17