Sharp MX-M550U 7-11, 11Touch the RESOLUTION key, 12Touch the key of the desired resolution

SAVING A DOCUMENT IMAGE FILE

11Touch the [RESOLUTION] key.

AUTO

EXPOSURE

300x300dpi

RESOLUTION

AUTO

ORIGINAL

12Touch the key of the desired resolution.

PRESS [START] TO SCAN ORIGINAL.

SCAN TO HDD					OK
			200x200dpi
		AUTO
		EXPOSURE
			300x300dpi
	RESOLUTION		400x400dpi	HALF TONE
		AUTO
			600x600dpi
		ORIGINAL

Select one of four resolution levels as appropriate for the original.

The selected resolution key is highlighted.

13Touch the [OK] key.

You will return to the screen of step 11.

OK

HALF TONE

16Touch the [OK] key.

You will return to the screen of step 14.

OK

MANUAL

17Placekey. the original and touch the [START]

[Placing the original]

●For information on placing the original, see "NORMAL COPYING" in chapter 4.

●If you selected the "Card Shot" special function, the document glass must be used.

●If you selected job build mode, the automatic document feeding function must be used.

Scanning begins.

If you are using the document glass, touch the [READ-END] key after all pages have been scanned.

NOTE

This completes the scan save procedure. Follow the steps below when you wish to call up the image and print or transmit it.

14Touch the [EXPOSURE] key.

AUTO

EXPOSURE

300x300dpi

RESOLUTION

AUTO

ORIGINAL

15Select [AUTO] or [MANUAL].

To have the exposure

AUTO MANUAL adjusted automatically, select [AUTO].

		If	you	selected
AUTO	MANUAL	[MANUAL], touch the
		or	key to adjust
		the exposure.
		(For a darker image, touch
		the	key. For a lighter
		image, touch the		key.)

18The saved image can be called up using the file name, folder name, or user name, or from the filing folder.

●To call up the image by entering the file name, folder name, or user name, see "Searching for and calling up a saved file" on page 7-13.

●To call up the image from the filing folder, see "Calling up and using a saved file" on page 7- 15.

19The following operations can be performed on the image that was called up in step 18:

●Print the image (page 7-17)

●Transmit the image (page 7-20)●Change the attribute ((page 7-21)●Move the image (page 7-22)

●Delete the image (page 7-22)

●Check details on the image (page 7-22)

7

7-11