Sharp MX-M700N Select the desired output mode page, Press the START key, Sided Copy, Output, File

NORMAL COPYING

7 Select the desired output mode (page 4-9).

	The	sort	mode	is the
2-SIDED COPY
	default mode.
	To	select	the	group
OUTPUT
	mode,		touch	the
	[OUTPUT]		key,	then
	touch the [GROUP] key
FILE
	on	the output		setting

screen, and then touch the [OK] key on the setting screen.

8 Use the numeric keys to set the desired number of copies.

	Up to 999 can be set.
	If you are only making a
	single copy, the copy can
	be made with the copy
	number display showing
LOGOUT	"0". Use the [C] (clear)
	key to cancel an entry if
a mistake has been made.

9 Press the [START] key.

If the [C] key is pressed while originals are being scanned, scanning will stop. If copying had

already started, copying and scanning will stop after the original in

progress is output to the original exit area. In these cases the copy quantity will be reset to "0".

NOTES

●The 1-sided to 1-sided copying mode is set as the default in the initial settings. If the default setting has not been changed using the "Initial status settings" (administrator settings), steps 3 to 5 on page 4-7 can be omitted.

To cancel copying...

To cancel a copy job in progress, press the [CA] key. A confirmation message will appear. Touch the [YES] key to cancel copying.

4-8