Sharp MX-M550N 2-16, Programming and editing paper types, Touchkey. the PAPER TYPE REGISTRATION

LOADING PAPER

■Programming and editing paper types

To program or edit the name of a paper type or set paper attributes, follow the steps below.

1 Touchkey. the [PAPER TYPE REGISTRATION]

OK

PAPER TYPE REGISTRATION

2 Select the paper type that you wish to program or edit.

SYSTEM SETTINGS
		OK
PAPER TYPE	REGISTRATION
SELECT THE	PAPER TYPE TO EDIT.

USER TYPE 1 USER TYPE 2 USER

PAPER TYPE REGISTRATION

USER TYPE 5 USER TYPE 6 USER

3 Touch the [TYPE NAME] key.

A character entry screen appears. Enter up to 14 characters. Refer to page 7-29for the procedure for entering characters.

PAPER TYPE REGISTRATION			CANCEL	EXIT
No.01
TYPE NAME	USER TYPE 1
FIXED PAPER SIDE		DISABLE	DUPLEX
DISABLE STAPLE		DISABLE	PUNCH

4 Set the paper attributes.

Touch the checkboxes to the left of the items to select them.

PAPER TYPE REGISTRATION			CANCEL	EXIT
No.01
TYPE NAME	USER TYPE 1
FIXED PAPER SIDE		DISABLE	DUPLEX
DISABLE STAPLE		DISABLE	PUNCH

FIXED PAPER SIDE:

Select this checkbox when paper is to be loaded print side down in the tray. Make sure a checkmark does not appear when paper is to be loaded print side up.

•If the two-sided function is disabled using "DISABLING OF DUPLEX" in the administrator settings (page 11 of the administrator settings guide), load the paper face up.

DISABLE DUPLEX:

Prohibits two-sided printing. Enable when the backside of the paper cannot be printed on.

DISABLE STAPLE:

Prohibits stapling. Enable when using special papers such as transparency film and label sheets.

DISABLE PUNCH:

Prohibits punching. Enable when using special papers such as transparency film and label sheets.

NOTES

●Tray attributes depend on the selected paper.

●"FIXED PAPER SIDE" and "DISABLE DUPLEX" cannot be simultaneously enabled.

5 Touch the [EXIT] key to exit the programming/editing procedure.

2-16