5 ENTERING & SETTING ITEMS

To set the default setting for relay originator report

When this equipment is setup as a relay originator, the report of the transmission to the relay stations is output.

1.Select "05. RELAY ORIGINATOR

REPORT" using the or but- ton and press the [ENTER] button.

COMMUNICATION REPORT 03.MULTI-ADD REPORT 04.MULTIPOLL REPORT

05.RELAY ORIGINATOR REPORT

2.Select the output setting using the

or button and press the [ENTER] button.

[1.ALWAYS]:

To always print a report whenever a document is transmitted.

[2.ON ERROR]:

To only print a report when an error has occurred.

[3.OFF]:

To not print a report automatically.

*Default for North America: [2.ON

ERROR]

Default for Europe: [1.ALWAYS]

3.To print the first page image of the Fax document on report, select "2. ON" and press the [ENTER] button.

y Select "1. OFF" if this option is not required.

*Default: [2.ON]

RELAY ORIGINATOR REPORT 1.ALWAYS

2.ON ERROR 3.OFF

PRINT 1st PG IMAGE? 1.OFF

2.ON

To set the default setting for relay station TX report

When this equipment is setup as a relay station, the report of the transmission to the relay destinations is output.

1.Select "06. RELAY STATION

REPORT" using the or but- ton and press the [ENTER] button.

COMMUNICATION REPORT 04.MULTIPOLL REPORT 05.RELAY ORIGINATOR REPORT

06.RELAY STATION REPORT

2.Select the output setting using the

or button and press the [ENTER] button.

[1.ALWAYS]:

To always print a report. [2.ON ERROR]:

To only print a report when an error has occurred.

[3.OFF]:

To not print a report automatically.

*Default for North America: [2.ON

ERROR]

Default for Europe: [1.ALWAYS]

RELAY STATION REPORT 1.ALWAYS

2.ON ERROR 3.OFF

212 Default Settings for List & Report Output

Page 214
Image 214
Toshiba GD-1220 manual Relay Originator Report 1.ALWAYS, On Error 3.OFF, Relay Station Report 1.ALWAYS