2 BASIC FUNCTIONS

Setting Originals

When setting originals on the glass

Originals are sent in the order they are placed on the original glass in both memory TX and direct TX modes. In direct TX mode, only one page can be sent at a time.

Do not place heavy objects (8.8 lb./4 kg or more) on the original glass and do not press on it with force.

Breaking the glass could cause personal injury.

1 Raise the Platen Cover (optional), Automatic Docu- ment Feeder (optional), or Reversing Automatic Docu- ment Feeder (optional), and place the original A with its face down on the glass.

2 Align the original against the left inner corner of the glass.

yDifferent size originals can also be sent in one transmission.

yWhen LD, LG, LT-R, ST, COMP, A3, A4-R, A5, B4, B5 or FOLIO originals are placed as shown in the figure on the right, the pre- entered sender information is printed in the area shown B in the figure and sent to the remote Fax.

yTo enter the sender information,

see P.205 “Registering the Terminal ID”.

A

B

yWhen LT, ST-R, A4, A5-R or B5- R originals are placed as shown in the figure on the right, the pre- entered sender information is printed in the area shown C in the figure and sent to the remote Fax.

C

32 About Originals

Page 34
Image 34
Toshiba GD-1220 manual Setting Originals When setting originals on the glass