4 SYSTEM FUNCTIONS
6 | Enter a mailbox number (up |
to 20 digits) with the digital |
keys and press the [ENTER] button.
yIf you make a mistake, press one of the following keys to correct the mistake.
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered. [BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlight- ing the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an existing character highlighted by the cur- sor. Press this key again to exit the Insert mode.
For key locations of [BACK- SPACE], [DELETE] and [INSERT], see the following page.
P.23 “Keyboard”
yWhen 100 mailboxes have been already registered, the screen on the right appears for about 2 seconds and returns to the basic screen.
When the mailbox specified has been already registered:
Since the screen on the right appears,
select the desired item using the 
or
button and press the [ENTER] but- ton.
[1. MODIFY]:
To modify the contents such as relay end terminals currently registered.
→go to step 7.
[2. RETAIN]:
To not modify the contents such as relay end terminals currently registered.
→go to step 6.
MAILBOX SETUP(RELAY)
NEW MAILBOX NUMBER(MAX20):
500
MAILBOX SETUP(RELAY)
No more MAILBOX
MAILBOX SETUP(RELAY)
Already assigned
MAILBOX SETUP(RELAY)
1.MODIFY
2.RETAIN
116 Mailbox Communication
