2 BASIC FUNCTIONS
yIf the original cannot be sent because the remote FAX is busy, the remote FAX is automatically redialed. Default values for the redial intervals and the redial count are
different depending on country/region. ( P.58 “Redialing”)
For redial interval and counters, you can set the desired value on "06. REDIAL MODE" in the Fax Setup menu. ( P.181 “Redial mode”)
yEven when memory transmission result in error, the error tone does not sound. How-
ever, the TX report is output to inform you of the error occurrence.
y Checking and Canceling the Communications ( P.68 “Checking the Communica- tions during Transmission”)
On-hook Transmission
In this mode, you can confirm the answering tone from the remote Fax without picking up the handset of the external telephone.
yThis operation is available when the fax communication lamp is OFF.
1 Press the [FAX] button on the control panel.
2 Place the original(s) and set the transmission condi- tions.
y P.32 “When setting originals on the glass”
y P.35 “When using the Auto- matic Document Feeder (optional) or Reversing Auto- matic Document Feeder (optional)”
yP.36 “Setting the Transmis- sion Conditions”
3 Presston. the [MONITOR] but-
yYou will hear the dial tone from the
yTo cancel the setting, press the [MONITOR] button again.
4 Specify the remote Fax.
y Keypad Dialing (Direct Entry with Digital Keys): P.41
y One Touch Key Dialing: P.43
yAbbreviated Dialing: P.46
yAlphabet Dialing: P.48
Dial tel number: |
|
| M: 100% |
RESOLUTION:STANDARD |
|
|
|
Each press of a digital key dials a number. If you make a mistake when dialing the remote Fax number, press the [MONITOR] button to cut the line, and then press the [MONITOR] button again to redial.
54 Specifying the Remote Fax
