5 ENTERING & SETTING ITEMS
To set the default setting for direct TX report
1.Select "01. TX REPORT" using the
or 
button and press the [ENTER] button.
COMMUNICATION REPORT
01.TX REPORT
02.MEMORY-TX REPORT 03.MULTI-ADD REPORT
2.Select the output setting using the
or 
button and press the [ENTER] button.
[1.ALWAYS]:
To always print a transmission report whenever a document is transmitted. [2.ON ERROR]:
To only print a transmission report when an error has occurred. [3.OFF]:
To not print a transmission report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
TX REPORT 1.ALWAYS
2.ON ERROR
3.OFF
To set the default setting for memory TX report
1.Select "02.
using the 
or 
button and press the [ENTER] button.
COMMUNICATION REPORT 01.TX REPORT
02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
2.Select the output setting using the
or 
button and press the [ENTER] button.
[1.ALWAYS]:
To always print a transmission report whenever a document is transmitted. [2.ON ERROR]:
To only print a transmission report when an error has occurred. [3.OFF]:
To not print a transmission report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.To print the first page image of the Fax document on TX report, select "2. ON" and press the [ENTER] but- ton.
y Select "1. OFF" if this option is not required.
*Default: [2.ON]
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE? 1.OFF
2.ON
210 Default Settings for List & Report Output
