2 BASIC FUNCTIONS

42 Specifying the Remote Fax

4

Press the [START] button

on the control panel.

When setting originals on the
glass
yWhen you want to send multi-
page originals with the current
scanning conditions unchanged,
place the next original on the
glass, and select “1. SCAN
NEXT ORIGINAL” on “BUILD
FAX JOB” screen, then press the
[ENTER] button. After finished
scanning of the last page, select
“3. COMPLETE” on “BUILD FAX
JOB” screen and press the
[ENTER] button to send the orig-
inals.
yWhen you want to change the
scanning conditions for each
page, select “2. CHANGE CUR-
RENT SETTINGS” on “BUILD
FAX JOB” screen and press the
[ENTER] button.
For details of this operation, see
the following page.
P.39 “Setting the Scanning
Conditions for Each Page”
yWhen you want to send single-
page original, select “3. COM-
PLETE” on “BUILD FAX JOB”
screen and press the [ENTER]
button to send the original.
When using the (Reversing)
Automatic Document Feeder
(optional)
The remote Fax is dialed
immediately and communication is
initiated.
yThe screen on the right may
appear when the equipment has
failed to detect the original size.
In this case, re-place the origi-
nal, or select the original size
using the or button
and press the [ENTER] button.

SCANNING TO MEMORY

JOB NUMBER :009

:001

:099%

SCANNING PAGE

RESIDUAL MEMORY

ENTER TEL NUMBER(MAX128):

2006-04-10 11:06 M: 100%

COMM.OPTION

RESOLUTION

:STANDARD

Select original size
2.LD
3.LT-R
1.LT