Specifying the Remote Fax
Keypad Dialing (Direct Entry with Digital Keys)
You can dial the telephone number of the remote Fax directly using the digital keys.
1 Press the [FAX] button on the control panel.
2 Place the original(s) and set the transmission condi- tions.
y P.32 “When setting originals on the glass”
y P.35 “When using the Auto- matic Document Feeder (optional) or Reversing Auto- matic Document Feeder (optional)”
yP.36 “Setting the Transmis- sion Conditions”
3 Enter the remote FAX num- ber using the digital keys on the control panel.
yIf you make a mistake, press one of the following keys to correct the mistake.
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered. [BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlight- ing the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of) an existing character highlighted by the cur- sor. Press this key again to exit the Insert mode.
For key locations of [BACK- SPACE], [DELETE] and [INSERT], see the following page.
P.23 “Keyboard”
:123456 |
|
| M: 100% |
RESOLUTION:STANDARD |
|
|
|
Specifying the Remote Fax 41
