3.To print the first page image of the Fax document on report, select "2. ON" and press the [ENTER] button.
y Select "1. OFF" if this option is not required.
*Default: [2.ON]
PRINT 1st PG IMAGE?
1.OFF
2.ON
To set the default setting for relay TX end terminal report
When this equipment is setup as a relay station, the report of the transmission to the relay destinations is transferred to the destination registered.
1.Select "07. RELAY END REPORT"
using the 
or 
button and press the [ENTER] button.
COMMUNICATION REPORT 05.RELAY ORIGINATOR REPORT 06.RELAY STATION REPORT
07.RELAY END REPORT
2.Select the output setting using the
or 
button and press the [ENTER] button.
[1.ALWAYS]:
To always send a report to the origina- tor.
[2.ON ERROR]:
To send a report when an error has occurred.
[3.OFF]:
To not send a report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.To print the first page image of the Fax document on report, select "2. ON" and press the [ENTER] button.
y Select "1. OFF" if this option is not required.
*Default: [2.ON]
RELAY END REPORT 1.ALWAYS
2.ON ERROR 3.OFF
PRINT 1st PG IMAGE? 1.OFF
2.ON
4 Press the [FAX] button to return to the Fax basic screen.
y You can press the [USER FUNCTIONS] button instead of [FAX] to exit the user func- tions menu and return to the default mode basic screen.
P.24 “Message LCD Screen”
Default Settings for List & Report Output 213
