Chapter 5 Configuration Basics
"PREQUISITES or WHERE USED does not appear if there are no prerequisites or references in other features to this one. For example, no other features reference DDNS entries, so there is no WHERE USED entry.
5.4.2InterfaceSee Section 5.2 on page 110 for background information.
"When you create an interface, there is no security applied on it until you assign it to a zone.
Most of the features that use interfaces support Ethernet, PPPoE/PPTP, cellular, wireless LAN, VLAN, and bridge interfaces.
MENU ITEM(S) | Network > Interface (except Network > Interface > Trunk) | |
PREREQUISITES | Port groups (configured in the Interface > Port Roles screen) | |
WHERE USED | Zones, trunks, IPSec VPN, device HA, DDNS, policy routes, static routes, HTTP | |
redirect, virtual server, application patrol | ||
| ||
|
|
Example: The dmz interface is in the DMZ zone and uses a private IP address. To configure dmz’s settings, click Network > Interface > Ethernet and then the dmz’s Edit icon.
5.4.3 TrunksUse trunks to set up load balancing using two or more interfaces.
MENU ITEM(S) | Network > Interface > Trunk |
PREREQUISITES | Interfaces |
WHERE USED | Policy routes |
|
|
Example: See Chapter 6 on page 125.
5.4.4 IPSec VPNUse IPSec VPN to provide secure communication between two sites over the Internet or any insecure network that uses TCP/IP for communication. The ZyWALL also offers
MENU ITEM(S) | VPN > IPSec VPN; you can also use the VPN Setup Wizard, which handles | |
most of the prerequisites for you. | ||
| ||
| Interfaces, certificates (authentication), authentication methods (extended | |
PREREQUISITES | authentication), addresses (local network, remote network, NAT), | |
| firewall, firewall | |
WHERE USED | Policy routes, zones, L2TP VPN | |
|
|
114 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|