|
| Chapter 10 Interface |
| Table 63 Interface > Cellular > Add (continued) | |
| LABEL | DESCRIPTION |
| More Settings/ | Click this button to display a greater or lesser number of configuration fields. |
| Less Settings |
|
|
|
|
| IP Address |
|
|
|
|
| Get | Select this option If your ISP did not assign you a fixed IP address. This is the |
| Automatically | default selection. |
|
|
|
| Use Fixed IP | Select this option If the ISP assigned a fixed IP address. |
| Address |
|
|
|
|
| IP Address | Enter the cellular interface’s WAN IP address in this field if you selected Use |
|
| Fixed IP Address. |
|
|
|
| Device Settings |
|
|
|
|
| Device | Select the 3G card you using with this entry or select auto to have the ZyWALL |
| Selection | automatically detect the type of card. |
|
|
|
| Band Selection | This field appears if you selected a 3G device that allows you to select the type of |
|
| network to use. Select the type of 3G service for your 3G connection. If you are |
|
| unsure what to select, check with your 3G service provider to find the 3G service |
|
| available to you in your region. |
|
| Select auto to have the card connect to an available network. Choose this option |
|
| if you do not know what networks are available. |
|
| You may want to manually specify the type of network to use if you are charged |
|
| differently for different types or network or you only have one type of network |
|
| available to you. |
|
| Select GPRS / EDGE (GSM) only to have this interface only use a 2.5G or 2.75G |
|
| network (respectively). If you only have a GSM network available to you, you may |
|
| want to select this so the ZyWALL does not spend time looking for a WCDMA |
|
| network. |
|
| Select UMTS / HSDPA (WCDMA) only to have this interface only use a 3G or |
|
| 3.5G network (respectively). You may want to do this if you want to make sure the |
|
| interface does not use the GSM network. |
|
|
|
| OK | Click OK to save your changes back to the ZyWALL. |
|
|
|
| Cancel | Click Cancel to exit this screen without saving. |
|
|
|
10.8 Cellular Status Screen
To check your 3G connection status, click Network > Interface > Cellular > Status. The following screen displays.
Figure 164 Interface > Cellular > Status
| 231 |
ZyWALL USG 100/200 Series User’s Guide | |
|
|