Appendix A Log Descriptions

Table 298 Routing Protocol Logs (continued)

LOG MESSAGE

DESCRIPTION

RIP v2-broadcast on

RIP v2-broadcast on interface %s has been enabled. %s: Interface

interface %s has been

Name.

enabled.

 

RIP send-version on

RIP send-version on interface %s has been changed to version 1 or 2

interface %s has been

or both 1 2. %s: Interface Name.

changed to %s.

 

RIP receive-version on

RIP receive-version on interface %s has been changed to version 1 or

interface %s has been

2 or both 1 2. 2nd%s: Interface Name.

changed to %s.

 

RIP send-version on

RIP send-version on interface %s has been reset to current global

interface %s has been

version %s. 1st %s: Interface Name, 2nd %s: RIP Version

reset to current

 

global version %s.

 

RIP receive-version on

RIP receive-version on interface %s has been reset to current global

interface %s has been

version %s. 1st %s: Interface Name, 2nd %s: RIP

reset to current

 

global version %s.

 

RIP v2-broadcast on

RIP v2-broadcast on interface %s has been disabled. %s: Interface

interface %s has been

Name

disabled.

 

OSPF on interface %s

Device-HA is currently running on the interface %s, so all the local

has been stopped

service have to be stopped including OSPF. %s: Interface Name

because Device-HA

 

binds this interface.

 

Area %s cannot be

One or more interfaces are still using this area, so area %s cannot be

removed. This area is

removed. %s: OSPF Area

in use.

 

Invalid OSPF %s

OSPF md5 or text authentication has been set without setting md5

authentication of area

authentication id and key, or text authentication key first.

%s.

 

Invalid OSPF virtual-

Virtual-link %s md5 authentication has been set without setting md5

link %d md5

authentication id and key first. %s: Virtual-Link ID

authentication of area

 

%s.

 

Invalid OSPF virtual-

Virtual-link %s text authentication has been set without setting text

link %s text

authentication key first. %s: Virtual-Link ID

authentication of area

 

%s.

 

Invalid OSPF virtual-

Virtual-link %s authentication has been set to same-as-area but the

link %s authentication

area has invalid authentication configuration. %s: Virtual-Link ID

of area %s.

 

Invalid OSPF md5

Invalid OSPF md5 authentication is set on interface %s. %s: Interface

authentication on

Name

interface %s.

 

Invalid OSPF text

Invalid OSPF text authentication is set on interface %s. %s: Interface

authentication on

Name

interface %s.

 

 

801

ZyWALL USG 100/200 Series User’s Guide