Appendix A Log Descriptions
Table 298 Routing Protocol Logs (continued)
LOG MESSAGE | DESCRIPTION |
Interface %s does not | Interface %s has been set OSPF authentication |
belong to any OSPF | however the interface does not belong to any OSPF area. %s: |
area. | Interface Name |
Invalid OSPF | Interface %s has been set OSPF authentication |
authentication of area | however the area has invalid text authentication configuration. %s: |
%s on interface %s. | Interface Name |
Table 299 NAT Logs
LOG MESSAGE | DESCRIPTION |
The NAT range is full | The NAT mapping table is full. |
%s FTP ALG has | The FTP Application Layer Gateway (ALG) has been turned on or off. |
succeeded. | %s: Enable or Disable |
Extra signal port of | Extra FTP ALG port has been changed. |
FTP ALG has been |
|
modified. |
|
Signal port of FTP ALG | Default FTP ALG port has been changed. |
has been modified. |
|
%s H.323 ALG has | The H.323 ALG has been turned on or off. %s: Enable or Disable |
succeeded. |
|
Extra signal port of | Extra H.323 ALG port has been changed. |
H.323 ALG has been |
|
modified. |
|
Signal port of H.323 | Default H.323 ALG port has been changed. |
ALG has been modified. |
|
%s SIP ALG has | The SIP ALG has been turned on or off. %s: Enable or Disable |
succeeded. |
|
Extra signal port of | Extra SIP ALG port has been changed. |
SIP ALG has been |
|
modified. |
|
Signal port of SIP ALG | Default SIP ALG port has been changed. |
has been modified. |
|
Register SIP ALG extra | SIP ALG apply additional signal port failed. |
port=%d failed. | %d: Port number |
Register SIP ALG | SIP ALG apply signal port failed. |
signal port=%d failed. | %d: Port number |
Register H.323 ALG | H323 ALG apply additional signal port failed. |
extra port=%d failed. | %d: Port number |
Register H.323 ALG | H323 ALG apply signal port failed. |
signal port=%d failed. | %d: Port number |
Register FTP ALG extra | FTP ALG apply additional signal port failed. |
port=%d failed. | %d: Port number |
Register FTP ALG | FTP ALG apply signal port failed. |
signal port=%d failed. | %d: Port number |
802 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|