ZyXEL Communications 100 Series, 200 Series manual 164

Chapter 6 Tutorials

2Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the Subnet Mask. Click OK.

Figure 117 Device HA > Active-Passive Mode > Edit: Master ZyWALL Example

3Set the Device Role to Master. This example focuses on LAN1’s connection to the Internet through the wan1 interface, so turn on monitoring for the wan1 and lan1 interfaces. Enter a Synchronization Password (“mySyncPassword” in this example) and click Apply.

Figure 118 Device HA > Active-Passive Mode: Master ZyWALL Example

4Click the General tab. Turn on device HA and click Apply.

164
	ZyWALL USG 100/200 Series User’s Guide