Chapter 27 Application Patrol

Figure 367 AppPatrol > Other > Edit

The following table describes the labels in this screen.

Table 142 AppPatrol > Other > Edit

LABEL

DESCRIPTION

Enable

Select this check box to turn on this policy.

 

 

Port

Use this field to specify a specific port number to which to apply this policy. Type

 

zero, if this policy applies for every port number.

 

 

Schedule

Select a schedule that defines when the policy applies or select Create Object to

 

configure a new one (see Chapter 38 on page 619 for details). Otherwise, select

 

any to make the policy always effective.

 

 

User

Select a user name or user group to which to apply the policy. Select Create

 

Object to configure a new user account (see Section 35.2.1 on page 596 for

 

details). Select any to apply the policy for every user.

 

 

From

Select the source zone of the traffic to which this policy applies.

 

 

To

Select the destination zone of the traffic to which this policy applies.

 

 

Access

This field controls what the ZyWALL does with packets that match this policy.

 

Choices are:

 

forward - the ZyWALL routes the packets.

 

Drop - the ZyWALL does not route the packets and does not notify the client of its

 

decision.

 

Reject - the ZyWALL does not route the packets and notifies the client of its

 

decision.

 

 

Source

Select a source address or address group for whom this policy applies. Select

 

Create Object to configure a new one. Select any if the policy is effective for every

 

source.

 

 

Destination

Select a destination address or address group for whom this policy applies. Select

 

Create Object to configure a new one. Select any if the policy is effective for every

 

destination.

 

 

Protocol

Select the protocol for which this condition applies. Choices are: TCP and UDP.

 

Select any to apply the policy to both TCP and UDP traffic.

 

 

Bandwidth

Configure these fields to set the amount of bandwidth the application can use.

Management

These fields only apply when Access is set to forward.

 

 

 

461

ZyWALL USG 100/200 Series User’s Guide