Chapter 6 Tutorials

Click Network > Interface > Ethernet and the wan1 interface’s Edit icon. Configure the IP address, subnet mask, and default gateway settings as follows and click OK.

Figure 47 Network > Interface > Ethernet > Edit wan1

6.1.2 How to Configure the OPT Interface for a Local Network

Here is how to set the opt interface for a separate local network. It uses 192.168.4.1 as its IP address and has a DHCP server to distribute IP addresses to connected DHCP clients.

1Click Network > Interface > Ethernet and the opt interface’s Edit icon. Set the IP Address to 192.168.4.1 and the Subnet Mask to 255.255.255.0. Zone to WAN and select Get Automatically as shown next. Then click More Settings.

126

 

ZyWALL USG 100/200 Series User’s Guide