Appendix A Log Descriptions

Table 293 Policy Route Logs (continued)

LOG MESSAGE

DESCRIPTION

To send message to

Failed to send control message to policy routing manager.

policy route daemon

 

failed!

 

The policy route %d

Allocating policy routing rule fails: insufficient memory.

allocates memory fail!

%d: the policy route rule number

The policy route %d

Use an empty object group.

uses empty user group!

%d: the policy route rule number

The policy route %d

Use an empty object group.

uses empty source

%d: the policy route rule number

address group!

 

The policy route %d

Use an empty object group.

uses empty destination

%d: the policy route rule number

address group!

 

The policy route %d

Use an empty object group.

uses empty service

%d: the policy route rule number

group

 

Policy-route rule %d

Rules is inserted into system.

was inserted.

%d: the policy route rule number

Policy-route rule %d

Rules is appended into system.

was appended.

%d: the policy route rule number

Policy-route rule %d

Rule is modified.

was modified.

%d: the policy route rule number

Policy-route rule %d

Rule is moved.

was moved to %d.

1st %d: the original policy route rule number

 

2nd %d: the new policy route rule number

 

 

Policy-route rule %d

Rule is deleted.

was deleted.

%d: the policy route rule number

Policy-route rules

Policy routing rules are cleared.

were flushed.

 

BWM has been

The global setting for bandwidth management on the ZyWALL has

activated.

been turned on.

BWM has been

The global setting for bandwidth management on the ZyWALL has

deactivated.

been turned off.

Table 294 Built-in Services Logs

LOG MESSAGE

DESCRIPTION

User on %u.%u.%u.%u

HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device was

has been denied access

denied.

from %s

%u.%u.%u.%u is IP address

 

%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET

 

 

HTTPS certificate:%s

An administrator assigned a nonexistent certificate to HTTPS.

does not exist. HTTPS

%s is certificate name assigned by user

service will not work.

 

HTTPS port has been

An administrator changed the port number for HTTPS.

changed to port %s.

%s is port number

788

 

ZyWALL USG 100/200 Series User’s Guide