Chapter 4 Wizard Setup

4.3.8 PPTP: Static IP Address Assignment

If you select Static as the IP Address Assignment, the following screen displays.

Figure 27 PPTP Encapsulation: Static

The following table describes the labels in this screen.

Table 12 PPTP Encapsulation: Static

LABEL

DESCRIPTION

ISP Parameters

 

 

 

Encapsulation

This displays the type of Internet connection you are configuring.

 

 

User Name

Type the user name given to you by your ISP. You can use alphanumeric and -

 

_@$./ characters, and it can be up to 31 characters long.

Password

Type the password associated with the user name above. Use up to 64 ASCII

 

characters except the [] and ?.

 

 

Retype to Confirm

Type your password again for confirmation.

 

 

Nailed-Up

Select Nailed-Upif you do not want the connection to time out.

 

 

Idle Timeout

Type the time in seconds that elapses before the router automatically

 

disconnects from the PPTP server.

 

 

PPTP

 

Configuration

 

 

 

Base Interface

This displays the identity of the Ethernet interface you configure to connect with a

 

modem or router.

 

 

Base IP Address

Type the (static) IP address assigned to you by your ISP.

 

 

IP Subnet Mask

Type the subnet mask assigned to you by your ISP (if given).

 

 

Server IP

Type the IP address of the PPTP server.

 

 

88

 

ZyWALL USG 100/200 Series User’s Guide