Chapter 10 Interface

Figure 152 Interface Wizard: OPT Interface First Screen

The following table describes the labels in this screen.

Table 52 Interface Wizard: OPT Interface First Screen

LABEL

DESCRIPTION

Would you like to

Select Yes to use the OPT interface as a WAN interface (for an Internet

configure OPT

connection).

interface as a

select No to use the OPT interface for a local network (similar to a lan1, ext-wlan,

WAN interface?

or dmz interface).

 

 

Cancel

Click Cancel to exit the wizard without saving your changes.

 

 

Next

Click Next to continue. If you selected Yes, go to Section 10.5.2 on page 215.

 

If you selected No, go to Section 10.5.3 on page 215.

 

 

10.5.2 Interface Wizard: WAN Type

This screen appears if you are configuring one of the WAN interfaces or you use the OPT interface for a WAN connection. Select the type of encapsulation this interface uses for its Internet connection.

Figure 153 Interface Wizard: WAN Type

The following table describes the labels in this screen.

Table 53 Interface Wizard: WAN Type

LABEL

DESCRIPTION

WAN Type

Choose the Ethernet option to use the WAN port as a regular Ethernet.

Selection

Otherwise, choose PPPoE or PPTP for a dial-up connection according to the

 

information from your ISP.

 

 

Back

Click Back to return to the previous screen.

 

 

Next

Click Next to continue. Go to Section 10.5.4 on page 216.

 

 

10.5.3 Interface Wizard: Non-WAN OPT Interface Setup

This screen displays if you choose to not use the OPT interface for an Internet connection. Configure the OPT interface as an interface for a local network (similar to a LAN or DMZ interface).

 

215

ZyWALL USG 100/200 Series User’s Guide