Chapter 45 Logs

The following table describes the labels in this screen.

Table 255 Maintenance > Log > Log Setting > Edit (System Log)

LABEL

DESCRIPTION

E-Mail Server 1/2

 

 

 

Active

Select this to send log messages and alerts according to the information in this

 

section. You specify what kinds of log messages are included in log information

 

and what kinds of log messages are included in alerts in the Active Log and Alert

 

section.

 

 

Mail Server

Type the name or IP address of the outgoing SMTP server.

 

 

Mail Subject

Type the subject line for the outgoing e-mail.

 

 

Send From

Type the e-mail address from which the outgoing e-mail is delivered. This address

 

is used in replies.

 

 

Send Log To

Type the e-mail address to which the outgoing e-mail is delivered.

 

 

Send Alerts

Type the e-mail address to which alerts are delivered.

To

 

 

 

Sending Log

Select how often log information is e-mailed. Choices are: When Full, Hourly and

 

When Full, Daily and When Full, and Weekly and When Full.

 

 

Day for

This field is available if the log is e-mailed weekly. Select the day of the week the

Sending Log

log is e-mailed.

 

 

Time for

This field is available if the log is e-mailed weekly or daily. Select the time of day

Sending Log

(hours and minutes) when the log is e-mailed. Use 24-hour notation.

 

 

SMTP

Select this check box if it is necessary to provide a user name and password to the

Authentication

SMTP server.

 

 

User Name

This box is effective when you select the SMTP Authentication check box. Type

 

the user name to provide to the SMTP server when the log is e-mailed.

 

 

Password

This box is effective when you select the SMTP Authentication check box. Type

 

the password to provide to the SMTP server when the log is e-mailed.

 

 

Active Log and

 

Alert

 

 

 

Log Category

This field displays each category of messages. It is the same value used in the

 

Display and Category fields in the View Log tab. The Default category includes

 

debugging messages generated by open source software.

 

 

System log

Select which events you want to log by Log Category (except All Logs; see

 

below). There are three choices:

 

disable all logs (red X) - do not log any information from this category

 

enable normal logs (green checkmark) - create log messages and alerts from

 

this category

 

enable normal logs and debug logs (yellow checkmark) - create log messages,

 

alerts, and debugging information from this category; the ZyWALL does not e-mail

 

debugging information, however, even if this setting is selected.

 

If you select one of the check boxes for All Logs, it affects the settings for every

 

category.

 

 

E-mail Server

Select whether this category of events should be included in the log messages

1

when it is e-mailed (green checkmark) and/or in alerts (yellow exclamation point)

 

for the e-mail settings specified in E-Mail Server 1. The ZyWALL does not e-mail

 

debugging information, even if it is recorded in the System log.

 

 

E-mail Server

Select whether this category of events should be included in log messages when it

2

is e-mailed (green checkmark) and/or in alerts (yellow exclamation point) for the e-

 

mail settings specified in E-Mail Server 2. The ZyWALL does not e-mail

 

debugging information, even if it is recorded in the System log.

Log Consolidation

 

 

 

 

721

ZyWALL USG 100/200 Series User’s Guide