Chapter 43 System
Figure 525 System > Vantage CNM
The following table describes the labels in this screen.
Table 246 System > Vantage CNM
LABEL | DESCRIPTION |
Vantage CNM | Click Advanced to display more configuration fields or click Basic to display fewer |
| fields. |
|
|
Enable | Select this check box to allow Vantage CNM to manage your ZyWALL. |
|
|
Server IP | Enter the IP address or fully qualified domain name of the Vantage server. |
Address/FQDN | If the Vantage CNM server is on a different subnet to the ZyWALL and is behind a |
| NAT router, enter the WAN IP address of the NAT router here and configure the |
| NAT router to forward UDP port 11864 traffic to the Vantage CNM server. |
| If the Vantage CNM server is behind a firewall, you may have to create a rule on |
| the firewall to allow UDP port 11864 traffic through to the Vantage CNM server |
| (most (new) ZyXEL firewalls automatically allow this). |
|
|
Transfer Protocol | Select whether the Vantage CNM sessions should use regular HTTP connections |
| or secure HTTPS connections. |
| Note: HTTPS is recommended. |
| The Vantage CNM server must use the same setting. |
|
|
Device | Select Auto to have the ZyWALL allow Vantage CNM sessions to connect to any |
Management IP | of the ZyWALL’s IP addresses. |
| Select Custom to specify the ZyWALL’s IP address that allows Vantage CNM |
| sessions. Configure the Custom IP field if you select this. You might for example |
| need to specify the IP address when using a WAN trunk that uses multiple WAN IP |
| addresses. |
|
|
Custom IP | Specify the ZyWALL’s IP address that allows Vantage CNM sessions. This field |
| applies when you select Custom in the Device Management IP field. |
|
|
Keepalive | Set how often the ZyWALL sends a keep alive packet to the Vantage CNM server if |
Interval | there is no other traffic. The keep alive packets maintain the Vantage CNM server’s |
| control session. |
|
|
Periodic Inform | Select this option to have the ZyWALL periodically send “Inform” messages to the |
Interval | Vantage CNM server. |
|
|
HTTPS | When you are using HTTPs, select this option to have the ZyWALL authenticate |
Authentication | the Vantage CNM server’s certificate. In order to do this you need to import the |
| Vantage CNM server’s public key (certificate) into the ZyWALL’s trusted |
| certificates. |
|
|
Vantage | Select the Vantage CNM server’s certificate. This applies when you enable HTTPS |
Certificate | authentication. |
|
|
| 701 |
ZyWALL USG 100/200 Series User’s Guide | |
|
|