ZyXEL Communications 100 Series, 200 Series 6.6.2How to Configure the Load Balancing in the WAN Trunk, 6.6.1How to Set Up Available Bandwidth on Ethernet Interfaces

Chapter 6 Tutorials

You do not have to change many of the ZyWALL’s settings from the defaults to set up this trunk. You only have to set up the bandwidth on wan1 and wan2 and change the algorithm that WAN_TRUNK uses.

6.6.1How to Set Up Available Bandwidth on Ethernet Interfaces

1Click Network > Interface > Ethernet and the wan1 Edit icon. Enter the available bandwidth (1000 kbps) in the Egress Bandwidth field. Click OK.

Figure 100 Network > Interface > Ethernet > Edit (wan1)

2Click the Edit icon for wan2, and enter the available bandwidth (512 kbps) in the Egress Bandwidth field. Click OK.

6.6.2How to Configure the Load Balancing in the WAN Trunk

1Click Network > Interface > Trunk. Click the Edit icon next to WAN_TRUNK.

2In the Load Balancing Algorithm field, select Weighted Round Robin. After the screen refreshes, enter 2 and 1 in the Weight column for wan1 and wan2, respectively. Click OK.

	155
ZyWALL USG 100/200 Series User’s Guide