Appendix A Log Descriptions
Table 286 myZyXEL.com Logs (continued)
LOG MESSAGE | DESCRIPTION |
System bootup. Do | The device processes a service expiration day check immediately after |
expiration daily- | it starts up. |
check. |
|
After register. Do | The device processes a service expiration day check immediately after |
expiration daily- | device registration. |
check immediately. |
|
Time is up. Do | The processes a service expiration day check every 24 hrs. |
expiration daily- |
|
check. |
|
Read MyZyXEL.com | Read data from EEPROM has failed. |
storage has failed. |
|
Open /proc/MRD has | This error message is shown when getting MAC address. |
failed. |
|
IDP service has | The IDP service period has expired. The device can find this through |
expired. | either a service expiration day check via MyZyXEL.com server or by |
| the device’s own count. |
The content filtering service period has expired. The device can find | |
service has expired. | this through either a service expiration day check via MyZyXEL.com |
| server or by the device’s own count. |
Unknown TLS/SSL | The device only supports SSLv3 protocol. %d: SSL version assigned |
version: %d. | by client. |
Load trusted root | The device needs to load the trusted root certificate before the device |
certificates has | can verify a server's certificate. This log displays if the device failed to |
failed. | load it. |
Certificate has | Verification of a server’s certificate failed because it has expired. |
expired. |
|
Self signed | Verification of a server’s certificate failed because it is |
certificate. |
|
Self signed | Verification of a server’s certificate failed because there is a self- |
certificate in | signed certificate in the server’s certificate chain. |
certificate chain. |
|
Verify peer | The device verified a server’s certificate while processing an HTTPS |
certificates has | connection. |
succeeded. |
|
Certification | Verification of a server’s certificate failed while processing an HTTPS |
verification failed: | connection. This log identifies the reason for the failure. |
Depth: %d, Error | 1st %d: certificate chain level |
Number(%d):%s. | 2nd %d: error number |
| %s: error message |
|
|
Certificate issuer | Verification of the specified certificate failed because the device could |
name:%s. | not get the certificate’s issuer name. %s is the certificate name. |
The wrong format for | The header format of a packet returned by a server is wrong. |
HTTP header. |
|
Timeout for get server | After the device sent packets to a server, the device did not receive |
response. | any response from the server. The root cause may be a network delay |
| issue. |
776 |
| |
ZyWALL USG 100/200 Series User’s Guide |
| |
|
|
|